Description
The ultimate “power dense” subwoofers, designed and fully built in house. Engineered right to the limit of what physics will allow for the absolute maximum bass output in the smallest possible size. The 15.2s offer the highest output/size ratio that is possible utilising the most advanced technology in amplification and driver design.
Purposed to work seamlessly together without compromise while providing; high output, low distortion, great dynamic headroom, very wide frequency response (down to 10hz in room), and clean effortless extension well over 250hz. This performance is far beyond what a typical subwoofer is capable of.
From the dual opposed high energy neodymium driven motors to the 4.8kW RMS amplification system, these subwoofers are a force to be reckoned with.
The well braced beautifully curved baltic birch cabinets are finished in anodised brushed aluminium, with 1/2″ thick solid aluminium top plates for a clean futuristic look.
Performance figures are most comparable with the Funk Audio 21.0 subwoofer. However, there is approximately a 3db – 4db advantage across frequency range with this system due to quadruple 15″ TSADv1 drivers vs one 21″ TSADv2 driver (60″ vs 21″) and the additional overall internal enclosure space by having a second subwoofer. Third party measurements c/o Databass.com attached.
Funk Audio 15.2 (Active)
Brand: Funk audio
Model Name/Number: 15.2 Dual opposed Subwoofers & 4.8kW RMS M1 Amplifie
Price (RRP): £16000
Choice Hifi Price: £5750
Product Information:
Included
2x Subwoofers
1x 4.8KW 2 Channel amp
Drivers: Funk Audio 15″ TSADv1, 4.5″ Aluminium Voice Coil, High Energy Neodymium Motor Structure, Dual Aluminium Shorting Rings for Reduced Distortion, Linear Inductance +/- 5% Through 3″ P-P Travel Resulting in Very Low Distortion and Clean Midbass, Cast Aluminium Frame, Anodised Aluminium Dustcap, Carbon Fibre Composite Cone, Tall Profile Treated Foam Surround, 10″ Diameter Spider, Under Spider Venting, Vented Pole Piece, Assembled Under High Temperate Epoxies, Hand Made in House
Amplifier: Funk Audio M1 (Hand Made in House – Black Anodised Aluminium), Dual XLR Inputs, USB Interface to PC, Auto On/Off, 20 Amp Rated Mains Input, 10 Foot Heavy Gauge Detachable Cord, Circuit Breaker/Power Switch
DSP Features: AllDSP (Free Download available PC & MAC https://www.funkaudio.ca/dsp-software.html), Parametric EQ, 5 Filter Types, 10 Bands/ch, High/Low Pass Crossovers, 10 Slope Options, Adjustable Delay, Level & Limiting
Input Connector: Dual XLR
Amplifier Output: 4.8kW RMS (2.4kW RMS x2), 120DB Dynamic Range, 0.01% THD at 3.6kW RMS Output
Overload Protection: Built in Protection, Adjustable Limiting
Power Requirements: Automatic Dual Voltage 115/230V (Factory Set)
Cabinet Dimensions: 17″ H x 18″ W x 17″ D, 1.5″ Thick Front/Rear Baffle, 1/2″ Thick Anodised Aluminium Top Plates
Cabinet Construction: Baltic Birch Plywood, Curved Side Walls, Well Braced, Rounded Corners, Built in Magnetics to Allow for Future Driver Protectors to be Purchased, Hand Made in House
Weight: 66kg x2
Age: 5 Years
Condition: 9/10
Voltage: 220/240/50Hz
Finish/Colour: silver
Packaging? Yes
Accessories? Yes
Length: 13 Gauge 4 Conductor Speakon Cable 8m (x2)
Item Location: In Stock
Status: Second Hand
to enquire about this product!
