Sold

Mark Levinson No. 383

, , , ,

Mark Levinson 383 integrated amp, boasting an array of features and 100wpc.
Don’t be fooled by numbers, this will drive most demanding loudspeakers! Just read the reviews.

£6,500.00 £3,450.00


Call Choice Hifi on 020 8392 1959 or to enquire about this product!


Enquire

The Nº383 Integrated Amplifier was designed to offer the highest levels of performance and construction in situations where the size and complexity of a separate component amp/preamp system would prove impractical. Combining power-amplifier and preamplifier functions into a single chassis is a well-accepted approach to delivering high performance at the lowest cost. Typically, however, integrated components are thought of as compromises dictated by cost considerations. This does not have to be the case, as the Nº383 clearly illustrates. Rated at 100W per channel at 8 ohms, the Nº383 offers both balanced and single-ended inputs, dual-mono power supplies, a software-based user interface, and remote control.
Three independent power supplies provide clean, stable DC power to the Nº383’s various circuit elements. Separate power supplies for the left and right channels ensure that demand from one channel does not modulate the power supply of the other. This dualmono approach, which is used in Mark Levinson separates, contributes to stable stereo imaging and effortless reproduction of dynamic contrasts.

Brand: Mark Levinson

Model Name/Number: 383 Integrated

Price (RRP): £6500

Choice Hifi Price: £3450

Product Information:

Rated power output:

100w/ch continuous rms power @ 8Ω

200w/ch continuous rms power @ 4Ω

above power ratings measured as continuous (rms) power from 20Hz–20kHz with no more than 0.3% THD

Frequency response:within 0.1dB from 20Hz to 20kHz

Gain:0, 6, 12, or 18dB in the line stage 26.9dB in the amplifier section

Volume control range:72.2dB

Gain resolution:

0.1dB steps above 38.5 in display (–34.7dB)
(with slowly increasing step size at progressively lower levels)

Input overload:

when gain is set to +18dB:2V on XLR, 1V on RCA

when gain is set to +12dB:4V on XLR, 2V on RCA

when gain is set to +6dB: 8V on XLR, 4V on RCA

when gain is set to 0dB:16V on XLR, 8V on RCA

Input impedance:100kΩ (balanced) 50kΩ (single-ended)

Output impedance:less than 0.05Ω, 20Hz–20kHz

Power consumption:100 watts in standby 200 watts at idle 250 watts operating

Mains voltage:100V, 120V, 220V, 230V or 240VAC at either 50 or 60Hz, factory set for destination country

Audio inputs:

(2) pairs balanced on XLR
(3) pairs single-ended on Madrigal RCA

Audio outputs:

(1) pair custom binding posts per channel

(1) pair record outputs on Madrigal RCA

Other connectors:

(1) IEC AC mains connector
(1) 3.5mm external IR input jack
(1) 3.5mm trigger out jack
(1) 3.5mm trigger in jack
(1) RJ-45 communications port (Mark Levinson LinkingTM) (1) RS-11 communications port (RS-232)
(2) RJ-45 control ports (future expansion)

Overall dimensions:width: 17.5″ (44.5cm) height: 6.55″ (16.6cm) depth: 19.53″ (49.6cm)

Shipping weight:80lb (36.6kg)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Age: 3 Years

Condition: 9/10

Voltage: 220/240/50Hz

Finish/Colour: Black

Packaging? Yes

Accessories? Yes

Item Location: 3rd Party

Status: Second Hand

Dimensions 5708473 cm