The Reference 75 is a stunning amplifier in every way – performance, styling and reliability combined to elevate your music listening to a new experience.
Capable of controlling a wide variety of speakers, the Reference 75 SE will transport you into the musical performance unlike any other comparable amplifier.
At the heart of the Reference 75 SE is decades of proven Audio Research vacuum tube technology, a legacy unrivalled by any other manufacturer of tube electronics.
Brand: Audio Research
Model Name/Number: Reference 75
Choice Hifi Price: £4590
Product Information:
Power Output: 75 watts per channel continuous from20Hz to 20kHz. 1kHz total harmonic distortion typically 0.6% at 75 watts, below 0.05% at 1 watt.
Approximate actual power available at ‘clipping’ 76 watts (1kHz). (Note that actual power output is dependent upon both line voltage and ‘condition’ i. e.: if power line has high distortion, maximum power will be a effected adversely, although from a listening standpoint this is not very critical)
Power Bandwidth: (-3dB points) 7Hz to 60kHz
Frequency Response: (-3dB points at 1 watt) 0.7Hz to 75 kHz
Input Sensitivity: 1.4V RMS BAL for rated output. (25 dB Bal gain into 8 ohms)
Input Impedance: 300K ohms Balanced Output Polarity: Non-inverting.
Balanced input pin 2+ (IEC-268)
Output Taps: 8 ohms, 4 ohms
Output Regulation: Approximately 1.0dB 8 ohm load to open circuit (Damping factor approximately 8)
Overall Negative Feedback: 15dB
Slew Rate: 10 volts/microsecond
Rise Time: 4.0 microseconds
Hum & Noise: Less than 0.06mV RMS – 112dB below rated output (IHF weighted, input shorted)
Power Supply Energy Storage: Approximately 520 joules
Power Requirements: 105-125VAC 60Hz (210-250VAC 50Hz) 410 watts at rated output, 500 watts
maximum, 230 watts idle
Tubes Required:
2 – Matched pair KT150 – Power Output 2 – 6H30 Driver
Age: 8 Years
Condition: 8/10
Voltage: 220/240/50Hz
Finish/Colour: Black
Packaging? Yes
Accessories? Yes
Item Location: In Stock
Status: Second Hand