Stillpoints heighten transparency, speed of transients, air, space, and dynamics, to name only a few attributes, to aid in the most natural presentation. Stillpoints provide isolation and control of destructive vibrational energy by means of a four-tier filter, substantially improving the sonic and musical qualities of your audio system.
Consider each Stillpoint as a mechanical diode, acting on energy. In this analogy one can understand that energy is allowed to travel in one direction only, away from the component, to ground. Expanding on this idea further it is clear then that the weight of the component being isolated is analogous to the breakdown voltage of a traditional diode. In other words the number & type of Stillpoints used under a piece of equipment is critical to their effective performance.
Model Name/Number: Range
Price (RRP): £See Product Information
Ultra Mini is the entry product in the new line of Ultra ( four tier filter) technology isolators from Stillpoints.
Ultra Mini V2 Set of 3 £399.00
Ultra Mini V2 Set of 4 £499.00
Ultra SS. Wonderful all-around performer, under electronics or attached to loudspeakers, is a four tier filter. (Silver or black)
Ultra SS V2 Set of 3 £699.00
Ultra SS V2 Set of 4 £920.00
Ultra SS V2 Set of 3 With Ultra Base £769.00
Ultra SS V2 Set of 4 With Ultra Base £990.00
Ultra 2 V2 extreme value/performance under Electronics uses V2 Technology (Silver or black)
Ultra 2 V2 with Ultra Base £440 each
Ultra 2 V2 without Ultra base £370
Ultra 5 V2 Latest V2 version, offering at least 50% improvement in performance (Silver or black)
Ultra 5 Each £679.00
Ultra 5 V2 with Ultra Base Each £750
Ultra 6. Latest V2 version, offering at least 50% improvement in performance (Siulver or black)
Ultra 6 Each £849.00
Ultra 6 with Ultra Base Each £899.00
Ultra 7 V2 extreme V2 technology – solely for loudspeakers, truly stunning performance
Ultra 7 V2 Each £1249
Ultra 7 V2 (Avalon) £1349 (black only)
Ultra LPI V2 LP Isolator ( LPI ). Slips over the spindle of your turntable and rests on the label portion of your lp. It absorbs the micro vibration that is present at the label area and makes the LP reproduction clearer, cleaner, more delicate, more open and life like. Also used on top of equipment to provide audible reduction of acoustic and mechanical feedback.
LPI Each £569.00
Ultra Base. Adds extra isolation performance, and improves stability on carpeted floor. Enables height adjustment of Ultra 5 and the new Ultra 6.
Ultra Base Each £79.00
Ultra spikes. Available for the Ultra SS and Ultra 5, allowing penetration of floor coverings, and the possibility of better detail and definition in some cases.
Ultra 5 spike Each £20.00
Ultra SS spike Each £20.00
ESS- Equipment Support System:
Each ESS rack consists of two Masts, two Crossbars, and the desired number of shelves. Shelves can be supplied as 3/4” acrylic or as ‘Grid’ shelves.
Grid shelves are suppled as standard with ‘Hard Hat’ couplers. These can be upgraded later or at point of order to Ultra Mini, Ultra SS or Ultra 5 couplers for increased performance.
Acylic and Grid shelves can be mixed to suit requirements.
The ESS rack can be designed with any number of shelves, below are just examples of what can be ordered.
The 20 and 26 inch wide units will accept weights up to 100Kg per shelf. The 20 and 26 inch wide ESS rack can hold up to 500 Kgs total.
The 40 inch wide unit is restricted to 55Kg per tier. There are two shelf spaces per tier – you can have a combination of units weighing up to 55 Kg. There is also available a three shelf combination for the 40 inch wide tier.
28 Series ESS Racks
(2) 28″ masts with 20″ crossbars and (3) 20″ x 16″ x 3/4″ acrylic shelves or ‘Grid’ shelves with Hard Hats with 3/4″ stainless steel support bars
Retail Price £8920.00
(2) 28″ masts with 26″ crossbars and (3) 26″ x 17″ x 3/4″ acrylic shelves or ‘Grid’ shelves with Hard Hats with 3/4″ stainless steel support bars
Retail Price £11740.00
(2) 28″ masts with 40″ crossbars and (6) 20″ x 16″ x 3/4″ acrylic shelves or ‘Grid’ shelves with Hard Hats with 3/4″ stainless steel support bars
Available shelf space from below the top support bar to the top of the bottom shelf is 20.5″ Each shelf takes up 1.75″
Please ask for individual pricing according to your requirements.
Item Location: In Stock